
Pool Heater Not Heating in Orlando
Heaters shut down for simple reasons as often as they fail: low flow, a dirty filter, a wrong setpoint, or a safety lockout. A few checks can save a wasted service visit, and they also give a technician a better starting point.
Before you request help
- Confirm the pump is running and the filter is not clogged. Heaters need flow, and many will not fire without it.
- Look at the display and write down any error code.
- Make sure the unit is in heat mode and the setpoint is above the current water temperature.
- For a gas heater, check that the gas is on at the meter. If you smell gas, leave the area and call the gas company or 911.
- For a heat pump, look at the coil for heavy dirt or lint, and note how cold it is outside. Heat pump pool heaters generally work best when the air stays above roughly 45 to 50°F.
Many Orlando pools are swimmable most of the year without heat, but owners often heat them in the cooler months. Heat pumps are common here because the air is usually warm enough for them to work well.
What a pro typically checks
Flow, heat exchanger condition, ignition or refrigerant charge, and the wiring or controls that stopped the unit. Ask for a written diagnosis and price before you approve a major part. We are a referral service and do not repair heaters. Start a request from our pool heater repair page, or compare types in our heat pump vs. gas guide.
Free referral to an independent Greater Orlando business. Requests accepted 24/7.
Sources and local resources
Sources checked November 19, 2026. Local rules change; confirm details with the agency.